Hydrophobic Nanotechnology Treatment for Natural Timbers

• Demonstration Video (.wmv / 988kb)
• Information Sheet (.pdf / 72kb)
• Technical Data Sheet (.pdf / 84kb)
• Material Safety Data Sheet (.pdf / 88kb)

Whether in the form of vapour or liquid, water can cause shrinking and swelling which lead to dimensional changes of wood and degradation of its finish. Moisture causes decay or rot of wood, premature failure of paint and accelerates the weathering of exposed timber.

Description

Nanoseal^® Wood allows wood to 'breath' naturally, and extends the life and colour retention of any water absorptive softwood and CCA treated timber.

Nanoseal^® Wood is a one component, ultra thin, transparent penetrating Nanotechnology impregnation. The product uses molecular bonding to form a surface that is water repellent, yet still permeable to water vapour.

Nanoseal^® Wood protects and preserves the substrate without altering the natural surface texture or colour. The treatment enables wood to resist decay and discolouration by wood-decay fungi that require moisture to survive. The hydrophobic effect also decreases timber swelling and shrinking that lead to cracking and warping.

Water runs off easily from the treated surface or when rinsed with water (easy clean / self-cleaning effect). Moss, algae and fungi formation cannot penetrate the treated surface.

The treatment is resistant to friction, is UV-stable and handle temperature change. Water or normal cleaning agents cannot remove it.

Recommended for

Nanoseal^® Wood can be used for internal and external timbers. New wood must be pre-weathered or sanded, and natural surface oil must be removed.

NOTE: Due to the low water absorption rate, hardwoods may be difficult to treat. Nanoseal^® Wood is not suitable for polished or painted surfaces.